AAEON GENE-QM67 - Manual (Page 46)

S u b C o m p a c t B o a r d G E N E - Q M 6 7
3.2 AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to
modify the basic system configuration. This type of information is
stored in battery-backed CMOS RAM so that it retains the Setup
information when the power is turned off.
Entering Setup
Power on the computer and press <Del> or <F2> immediately. This
will allow you to enter Setup.
Main
Set the date, use tab to switch between date elements.
Advanced
Enable disable boot option for legacy network devices.
Chipset
host bridge parameters.
Boot
Enables/disable quiet boot option.
Security
Set setup administrator password.
Save&Exit
Exit system setup after saving the changes.
Note:
1. If the "Onboard LVDS2 (CH7511)" has been set "Disable," the status of
"Primary IGFx Boot Display" is "Auto Detect." The screen cannot be
Chapter 3 AMI BIOS Setup 3-3