AAEON IMBA-880 Rev.B User Manual
Page 25
I n d u s t r i a l M o t h e r b o a r d
I M B A - 8 8 0 R e v . B
Chapter 3 CPU, Heatsink and Fan Installation
3-2
3.1 CPU installation and motherboard handling
Note: When integrating a Pentium 4 processor-based system, be sure to take the
proper electrostatic discharge (ESD) precautions.
Caution: Please follow the steps below to ensure proper installation of your
processor. Failure to follow these instructions may result in damage to your CPU
and/or your motherboard.
Protective Cover
Step 1: (Socket Preparation)
Note: Visually inspect to ensure that the socket protective cover is present and
securely fastened.
1. Opening
the
Socket:
Note: Hold corner of the load plate while opening and closing the load
lever. This will prevent the bounce back of the load plate which can
cause bent contacts.
a. Disengage the Load Lever by pressing down and
out on the hook allowing the lever to clear the
Retention Tab and rotate to the fully open position.
Load
lever
Retention
tab