AAEON IMBA-880 Rev.B - Manual (Page 27)

I n d u s t r i a l M o t h e r b o a r d I M B A - 8 8 0 R e v . B
Chapter 3 CPU, Heatsink and Fan Installation 3-4
Step 2: (Processor Handling)
Note: Handle Processor by substrate edges only.
Caution: Do not touch processor contacts at any time
a. Remove processor from shipping media by
grasping substrate edges only
b. Visually inspect the processor gold pad array for
presence of foreign material. If foreign material is
present the pads may be wiped clean with a
lint-free cloth and isopropyl alcohol.
c. Locate the connector 1 indicator and the two
orientation notches. (See photo)