AAEON EMB-BT1 - Manual (Page 46)

3-14 EMB-BT1
IDO Request Enable [Disabled]
Configuration options: [Enabled] [Disabled]
IDO Completion Enable [Disabled]
Configuration options: [Enabled] [Disabled]
LTR Mechanism Enable [Disabled]
Enable or disable Latency Tolerance Reporting. Configuration options:
[Enabled] [Disabled]
End-End TLP Prefix Blocking [Disabled]
Configuration options: [Enabled] [Disabled]
Target Link Speed [Auto]
Configuration options: [Auto] [Force to 2.5 GT/s] [Force to 5.0 GT/s]
Clock Power Management [Disabled]
Configuration options: [Enabled] [Disabled]
Compliance SOS [Disabled]
Configuration options: [Enabled] [Disabled]
Hardware Autonomous Width [Disabled]
Set to Disabled to prevent hardware from changing link width. Configuration
options: [Enabled] [Disabled]
Hardware Autonomous Speed [Disabled]
Set to Disabled to prevent hardware from changing link speed. Configuration
options: [Enabled] [Disabled]