Xp / windows – AAEON IMBM-Q67A User Manual
Page 29
2-21
Chapter 2: Motherboard information
12. ASM 1061 Serial ATA 6Gb/s connector (7-pin SATA6G_1 [gray])
This connector connects to Serial ATA 6Gb/s hard disk drives and optical
drives via Serial ATA 6Gb/s signal cables.
NOTES:
• This connector is set to [IDE Mode] by default. In IDE mode, you can
connect Serial ATA bootable hard disk drives installed only with Windows
®
XP / Windows
®
7, or Serial ATA data hard disk drives to this connector.
• ATAPI devices are not supported on this connector.
• You must install Windows
®
XP Service Pack 3 or later version before using
Serial ATA hard disk drives.
• When using hot-plug and NCQ, set the ASM1061 Storage Controller
item in the BIOS to [AHCI Mode]. See section 3.4.10 Onboard Devices
Configuration for details.
SATA6G_1
GND
RSATA_RXP1
RSATA_RXN1
GND
RSATA_TXN1
RSATA_TXP1
GND
IMBM-Q67A ASM 1061 SATA 6.0Gb/s connector
IMBM-Q67A