AAEON IMBM-Q67A - Manual (Page 51)

Chapter 3: BIOS setup 3-19
3.6.5 SATA Boot Configuration [Enable All]
Allows you to set all the SATA ports or a specific SATA port as a bootable SATA
port. Configuration options: [Enable All] [Only SATA1] [Only SATA2] [Only SATA3]
[Only SATA4] [Only SATA5] [Only SATA6]
NOTES:
SATA1: labeled SATA6G_2 on this motherboard;
SATA2: labeled SATA6G_3 on this motherboard;
SATA3: labeled SATA3G_1 on this motherboard;
SATA4: labeled SATA3G_2 on this motherboard;
SATA5: labeled SATA3G_3 on this motherboard;
SATA6: labeled SATA3G_4 on this motherboard.
3.6.6 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the
boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-
party manufacturer had set the add-on device to do so.
3.6.7 Boot Option Priorities
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system.
NOTES:
• To select the boot device during system startup, press <F8> after the first
screen appears.
• To access Windows OS in Safe Mode, press <F8> after POST.
3.6.8 Boot Override
These items displays the available devices. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Click an item to start booting from the selected device.