AAEON HSB-800I - Manual (Page 18)

H a l f - s i z e S B C H S B - 8 0 0 I
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label Function
JP1 CFD Voltage 3.3V/ 5V Selection
JP2 Clear CMOS
JP3 AT/ATX Power Type Selection
JP4 LCD Clock and Power Selection
JP5 Inverter Voltage Selection
2.5 List of Connectors
The board has a number of connectors that allow you to configure
your system to suit your application. The table below shows the
function of each board's connectors:
Label Function
FP1 Front Panel Connector 1
FP2 Front Panel Connector 2
VGA1 VGA Display Connector
FDD1 Floppy Connector
IDE1 EIDE Connector (Support one IDE device only)
CFD1 Compact Flash Slot (Always master)
COM1/3/4 RS-232 Serial Port Connector
COM2 RS-232/422/485 Serial Port Connector
Chapter 2 Quick Installation Guide 2-6