AAEON HSB-800P User Manual
Page 41
Advertising
H a l f - s i z e S B C
H S B - 8 0 0 P
Appendix A Programming the Watchdog Timer
A - 2
A.1 Programming
HSB-800P utilizes ITE 8712 chipset as its watchdog timer controller.
( K version )
Below are the procedures to complete its configuration and the
AAEON intial watchdog timer program is also attached based on
which you can develop customized program to fit your application.
Configuring Sequence Description
After the hardware reset or power-on reset, the ITE 8712 enters the
normal mode with all logical devices disabled except KBC.
There are three steps to complete the configuration setup: (1) Enter
the MB PnP Mode; (2) Modify the data of configuration registers; (3)
Advertising