AAEON AGD-317D - Manual (Page 21)

L C D D i s p l a y A G D - 3 1 7 D
Chapter 2 Hardware Installation 2-6
2.5 DVI Port Connector
Connecting a standard DVI-D connector through I/O port of this unit.
This connector supports digital signals only
Pin Signal Pin Signal
1 N.C. 2 TMDS Data 2+
3 TMDS Data 2/4 shield 4 TMDS Data 4-
5 TMDS Data 4+ 6 DDC clock
7 DDC data 8 N.C.
9 TMDS Data 1- 10 TMDS Data 1
11 TMDS Data 1/3 shield 12 TMDS Data 3-
13 TMDS Data 3+ 14 +5V
15 Ground 16 Hot plug detect
17 TMDS data 0- 18 TMDS data 0+
19 TMDS data 0/5 shield 20 TMDS data 5-
21 TMDS data 5+ 22 TMDS clock shield
23 TMDS clock+ 24 TMDS clock-
C1 N.C. C2 N.C.
C3 N.C. C4 N.C.
C5 N.C.