AAEON AGD-317D User Manual
Page 23
Advertising
L C D D i s p l a y
A G D - 3 1 7 D
Chapter 2 Hardware Installation
2-8
2.7 Mini USB Connector For Touch Screen
This pin definition of the connector will be referred when a touch
screen has been installed. It must be connected to the Mini USB
port of the PC. The touch screen cable is included with all orders
which include the optional Mini USB Touch Screen.
Pin Signal
Pin
Signal
1 +5V
2 DATA
(-)
3 DATA
(+)
4 N.C.
5 GND,
Ground
Note: Touch Screen can be switched to USB or COM by adjusting the
DIP-switch
Advertising