AAEON ACP-1103 - Manual (Page 112)

M u l t i - T o u c h P a n e l P C A C P - 1 1 0 3
Appendix E Digital I/O Ports E-4
E.4 Digital I/O Sample Program
**************************************************************************
// SuperIO relative definition (Please reference to Table 2)
#define SIOIndex 0x2E
#define SIOData 0x2F
#define DIOLDN 0x06
IOWriteByte(byte IOPort, byte Value);
IOReadByte(byte IOPort);
// DIO relative definition (Please reference to Table 3)
#define DirReg 0xD0 // 0:input, 1: output
#define InputPin 0x00
#define OutputPin 0x01
#define OutputReg 0xD1 // 0:low, 1: high
#define StatusReg 0xD2 // 0:low, 1: high
#define PinLow 0x00
#define PinHigh 0x01
#define Pin1Bit 0x00
#define Pin2Bit 0x01
#define Pin3Bit 0x02
#define Pin4Bit 0x03
**************************************************************************
**************************************************************************
VOID
Main
(){
Boolean PinStatus ;
// Procedure : AaeonReadPinStatus
// Input :
// Example, Read Digital I/O Pin 3 status
// Output :
//
InputStatus :
// 0: Digital I/O Pin level is low
// 1: Digital I/O Pin level is High
PinStatus = AaeonReadPinStatus( Pin3Bit );