AAEON AEC-6643 - Manual (Page 31)

E m b e d d e d C o n t r o l l e r A E C - 6 6 4 3
backup for data retention. You have to replace the battery when it
finally runs down.
3.2 AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to
modify the basic system configuration. This type of information is
stored in battery-backed CMOS RAM and BIOS NVRAM so that it
retains the Setup information when the power is turned off.
Entering Setup
Power on the computer and press <Del>or <F2> immediately. This
will allow you to enter Setup.
Main
Set the date, use tab to switch between date elements.
Advanced
Enable disable boot option for legacy network devices.
Monitor
Show the environment information.
Boot
Enables/disable quiet boot option.
Save&Exit
Exit system setup after saving the changes.
Chapter 3 AMI BIOS Setup 3-3