AAEON AEC-6643 - Manual (Page 70)

E m b e d d e d C o n t r o l l e r A E C - 6 6 4 3
Appendix C AHCI Settings C-2
C.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy below files from “Driver CD -> Step7-RAID&AHCI\
WinXP_32” to diskette.
Step 2: Connect the USB Floppy drive to the board and insert the diskette
from previous step.
Step 3: Configure SATA Controller to AHCI mode in BIOS SETUP Menu:
Advanced -> SATA Configuration -> SATA Mode -> AHCI Mode