Ram module msata – AAEON TKS-P20-CV01 User Manual
Page 23
Advertising
E m b e d d e d B o x
T K S - P 2 0 - C V 0 1
Chapter 2 Quick Installation Guide
2-8
2.4 Installing mSATA and RAM module
Step 1: Unfasten the screws on the I/O cover from Left side
Step 2: Remove the I/O cover then you can see the inside of system
Step 3: Locate the memory module, Insert the gold colored contact into the
Memory Socket. Push the module down, until it is firmly seated locking two
latches on the sides.
Step 4: Locate the mSATA module(same with mini card module), insert the gold
colored contact into the Socket of mSATA mini card. Push the module down,
until it is firmly seated by locking two latches on the sides.
Step 5: Please take the I/O cover back to the chassis. Then fasten the 4 screws
of I/O cover.
RAM Module
mSATA
Advertising