AAEON TKS-P20-CV01 - Manual (Page 91)

E m b e d d e d B o x T K S - P 2 0 - C V 0 1
Appendix D AHCI Setting D-2
D.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy below files from “Driver CD -> STEP3-AHCI \WinXP_32” and
to diskette.
Step 2: Connect the USB Floppy drive to the board and insert the diskette
from previous step.
Step 3: Configure SATA Controller to RAID mode in BIOS SETUP Menu:
Advanced -> IDE Configuration -> SATA Mode -> AHCI Mode