AAEON AEC-204 - Manual (Page 14)

W a l l m o u n t C h a s s i s A E C - 2 0 4
Chapter 2 Quick Installation Guide 2- 14
2.9 Cable Connections
Note: Each cable has a specific colored line designated for pin
number 1 make sure these connections are carefully carried out.
Hard drive cable connection
Find the 40-pin and 44-pin header hard drive cable. Plug the 40-pin
header and plug this end into the hard drive, and connect the 44-
pin header into CPU board.
Floppy drive cable connection
Find the 34-pin header floppy drive cable. Connect one end to the
floppy drive and the other to the CPU board (34-pin).
CDROM cable connection
Find the 40-pin header CDROM cable. Connect one end to the
CDROM drive and the other end to the CPU board through
accessory board (40-pin).
Chassis Internal Cables
Power led cable, reset cable, internal P/S 2 cable, COM cable,
serial cable, printer port cable, Ethernet, reset button cable, MIC in
cable, line in/out cable all these cables have their specific locations
refer to the SBC manual to find their specific pin position.