ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 13)

10 Display and setting elements
12
10.3 Acoustic signal
The alarm centre can also signal the various states and error messages acoustically:
1 x beep Centre was deactivated
2 x beep Centre was activated
8 x beep System error (tampering, jamming,
supervision), zone is open while
activating the system
10.4 Setting elements on the wireless PCB
10.4.1 Programming keys (A)
On the right, there are three keys (SELECT, SET, ESC/DEL) for
training and programming the wireless components.
10.4.2 Tamper switch
A cover tamper switch (B) and a wall tamper switch protect the alarm centre from
unauthorised opening and removal from the wall.
B
E
C
A
D
F