ABUS FUAA10021 Secvest IP Basic Set Operating instructions User Manual
Page 72
15 Teaching the wireless components
71
Socket training mode:
¾
Connect the socket to the power.
¾
Press the button on the socket for about 7 seconds until the wireless
socket beeps.
¾
Keep pressing again briefly until the LED lights up yellow.
¾
Press the button again for about 4 seconds. The device beeps and the
yellow LED flashes.
¾
Release the button. The wireless socket beeps two times again.
To train the wireless socket, the training mode needs to be deactivated on
the web interface to switch the output for the learning procedure. This can be
deactivated via the web server:
“System
Æ
Maintenance
Æ
Training mode
Æ
OFF”.
(User name: Admin/Password: 12345678)
Configuring the output via web server:
For wireless output in the web server, make sure that you have also ticked
“Manual” as the output property, as this ensures manual switching.
You can make the settings at Output / Wireless output 1/2
(User name: admin / password: 12345678)