Operation 4.1 start-up and test – Alpha Technologies CFR 600, CFR 600XT, CFR 1000 User Manual
Page 26
Advertising
20
4. OPERATION
4.1 Start-up and Test,
continued
Switching OFF the UPS:
1. Switch all equipment connected to the UPS OFF.
2. Switch the rear panel “BATTERY” circuit breaker OFF. This will
prevent the UPS from initiating LINE FAILURE operation when AC power
is removed.
3. Unplug the CFR's AC power cord from the wall receptacle.
BATTERY
Circuit Breaker
AC LINE
Power Cord
Figure 8
UPS Shutdown
Advertising