Alpha Technologies CFR 600, CFR 600XT, CFR 1000 - Manual (Page 69)

IMPORTANT
THE UPS CONTAINS MORE THAN ONE LIVE CIRCUIT.
DURING AN EMERGENCY, UTILITY POWER MAY BE
DISCONNECTED AT THE SERVICE ENTRANCE OR MAIN
ELECTRICAL PANEL TO PROTECT EMERGENCY
PERSONNEL; HOWEVER, POWER WILL STILL BE PRESENT
AT THE UPS OUTPUT.
TO PREVENT THE POSSIBILITY OF INJURY TO SERVICE OR
EMERGENCY PERSONNEL, ALWAYS SWITCH THE UPS
REAR PANEL BATTERY CIRCUIT BREAKER(S) OFF TO DE-
ENERGIZE THE CIRCUIT.
EMERGENCY SHUTDOWN PROCEDURE:
1. Switch the rear panel BATTERY circuit breaker OFF.
2. Unplug the AC power cord from the wall receptacle or the
back of the unit. If hardwired, switch the main panel AC
breaker to the UPS OFF
NOTE: Press the wall mounted EPO switch to switch OFF the
Battery Circuit Breaker (only on CFR 1000 units equipped
with this option).
EMERGENCY SHUTDOWN
CFR 1000
EMERGENCY SHUTDOWN
REMOVE
AC LINE
Power Cord
2
N.O.
EPO Switch
Factory Installed Option on
CFR 1000 Only
7
8
BATTERY
Breaker OFF
1