Maintenance – Alpha Technologies AlphaGen 5.0kW Auxiliary Power Unit User Manual
Page 51
Advertising
3. Maintenance
51
031-132-B0-001 Rev. A
TM
©2000
Coat the fitting with thread sealant.
Use only NFPA-approved pipe sealant ,
i.e., Megaloc Multipurpose thread sealant
(stock #15-808) - or equivalent.
Install the fitting in the new fuel port.
Install the sealing plug into the now-
open port.
NOTE:
Perform the procedure
in reverse order if
converting the unit from
Liquid Propane to
Natural Gas.
3.10 Fuel Conversion - Natural Gas to LP, continued
Repair and/or replacement procedure, continued:
End of Procedure
3.10.2 Dual-Fuel Load Block Conversion, continued
NOTE:
Verify the replacement gas sensor is calibrated to detect
the appropriate gas (i.e., Propane or Natural Gas). For further
information, contact Alpha Technologies Technical Support
at: 1-800-863-3364.
Advertising