Alpha Technologies UPE-8 - Manual (Page 8)

745-179-C0-001 Rev. A
8
2. Installation
2.2 Front Door Cover Installation Procedure
1. Drill six 9/64” holes at the center punches on both sides of the
louvers.
2. Remove the protective paper from the adhesive strips on
item 3 (2 pcs), and place on the top and bottom of the storm
cover, item 4.
3. Using the rivets provided with the kit, attach the storm cover
to the enclosure’s front door (see inset below).
4. Leave the door off for the remainder of the installation.
4
3
Storm Cover
Enclosure
Rivet Gun
Rivet
Fig. 3 Door Cover Placement