Atec EM-Test-OCS500N6F - Manual

DATA SHEET > OCS 500N6F series > 20130618
OCS 500N6F SERIES
SIMULATOR FOR FAST AND SLOW DAMPED OSCILLATORY
WAVES AND RINGWAVE
FOR TESTS ACCORDING TO ...
> ANSI/IEEE C37.90
> ANSI/IEEE C62.41
> EN 61000-4-10
> EN 61000-4-12
> EN 61000-4-18
> IEC 60255-22-1
> IEC 61000-4-10
> IEC 61000-4-12
> IEC 61000-4-18
> IEC 61850-3
> IEC 62052-11
OCS 500N6FX - COMPACT TESTERS FOR FAST/SLOW DAMPED OSCILLATORY WAVES AND RINGWAVE
The OCS 500N6F series includes the test capabilities for fast damped oscillatory waves at 3MHz/10MHz/30MHz up to 4.4kV
and is extendable for slow damped oscillatory waves at 100kHz/1MHz up to 3.0kV (as per EN/IEC 61000-4-18) and for
ringwave up to 6kV as per EN/IEC 61000-4-12.
Damped Oscillatory Waves are repetitive transients mainly occurring in power, control and signal cables installed in high
voltage and medium voltage stations, divided into slow and fast damped oscillatory waves. The Ringwave is a non-repetitive
damped oscillatory transient occurring in low-voltage power, control and signal lines supplied by public and non-public
networks.
HIGHLIGHTS
> Fully automated single box test system
> Single DUT port
> Fast Damped Oscillatory Waves up to 4.4kV
> Slow Damped Oscillatory Waves up to 3kV
(option)
> Ringwave up to 6kV (option)
APPLICATION AREAS
INDUSTRY
COMPONENTS
MEDICAL
BROADCAST
RESIDENTIAL
RENEWABLE ENERGY
www.emtest.com © EM TEST > PAGE 1/5