Atec EM-Test-OCS500N6F - Manual (Page 3)

DATA SHEET > OCS 500N6F series > 20130618
TECHNICAL DETAILS
OCS 500N6F MAIN-UNIT MODELS
OCS 500N6F With built-in CDN
AC 250V / 16A
DC 250V / 10A
OCS 500N6F.1 With built-in CDN
AC 250V / 32A
DC 250V / 20A
OCS 500N6F.2 With built-in CDN
AC 3x440V / 16A
DC 250V / 10A
OCS 500N6F.3 With built-in CDN
AC 3x440V / 32A
DC 250V / 20A
FAST DAMPED OSCILLATORY
MODULE
FAST DAMPED OSCILLATORY WAVES AS PER IEC/EN
61000-4-18
Voltage (o.c.) at
HV output 450V - 4,400V ±10%
Rise time 5ns ±30%
Oscillation
frequencies 3MHz, 10MHz and 30MHz, ±10%
Decaying Peak 5 to be > 50% of peak 1 value
Peak 10 to be < 50% of peak 1 value
Source impedance 50ohm ±20%
Polarity Positive, negative
Repetition rate Max. 5,000/s ±10%
Burst duration 50ms ±20%, at 3MHz
15ms ±20%, at 10MHz
5ms ±20%, at 30MHz
Burst period 300ms ±20%
Short-circuit
current 9A - 88A ±20%
Rise time current
waveform < 330ns at 3MHz
< 100ns at 10MHz
< 33ns at 30MHz
Decaying (current) Peak 5 to be > 25% of peak 1 value
Peak 10 to be < 25% of peak 1 value
SLOW DAMPED OSCILLATORY
MODULE (OPTION)
SLOW DAMPED OSCILLATORY WAVES AS PER IEC/EN
61000-4-18 (OPTION)
Voltage (o.c.) at
HV output 250V - 3,000V ± 10%
Voltage (o.c) at
line output 250V - 2,500V ± 10%
Rise time 75ns ± 20%
Oscillation
frequencies 100kHz and 1MHz ± 10%
Decaying Peak 5 to be > 50% of peak 1 value
Peak 10 to be < 50% of peak 1 value
Source impedance 200ohm ± 20%
Polarity Positive, negative
Repetition rate Max. 50/s for 100kHz and
Max. 500/s for 1MHz
Burst duration At least 2s
RINGWAVE MODULE (OPTION)
RINGWAVE AS PER IEC/EN 61000-4-12 AND ANSI/IEEE
C62.41 (OPTION)
Voltage (o.c.) 250V - 6,000V ± 10%
Rise time 0.5us ± 30%
Oscillation
frequency 100kHz ± 10%
Decaying Ratio of peak 2 to peak 1: 0.4 - 1.1
Ratio of peak 3 to peak 2: 0.4 - 0.8
Ratio of peak 4 to peak 3: 0.4 - 0.8
Source impedance 12ohm and 30ohm ± 20%
200ohm for I/O lines (CNV 504N5)
Peak current (s.c.) Max. 500A @ 12ohm or
Max. 200A @ 30ohm internally;
Max. 30A @ 200ohm, with
CNV 504N5
Rise time < 1us
Oscillation
frequency 100kHz ± 10%
Polarity Positive, negative
Repetition rate 1 to 60 transients per minute
www.emtest.com © EM TEST > PAGE 3/5