Atec Agilent-85133F User Manual
Atec Equipment
Advertising
Table of contents
Document Outline
- Title Page
- Safety and Regulatory Information
- In This Guide...
- Contents
- Introducing the Agilent 85225F Performance Modeling System
- Performance Modeling System Configuration Overview
- RF and DC Measurement System Configuration
- Figure 1 System Block Diagram
- The RF Subsystem
- The DC Subsystem
- The Bias Networks
- Component Integration
- Figure 2 System Components
- Table 3 Front Panel System Connections, with Agilent 4156C
- Figure 3 Front Panel Connections with Agilent 4156C
- Table 4 Front Panel System Connections, with Agilent E5260A or E5270B
- Figure 4 Front Panel Wiring Diagram with Agilent E5260A or E5270B
- Table 5 Rear Panel System Connections with Agilent 4156C
- Figure 5 Rear Panel Wiring Diagram with Agilent 4156C
- Table 6 Rear Panel System Connections with Agilent E5260A or E5270B
- Figure 6 Rear Panel Wiring with Agilent E5260A or E5270B
- Figure 7 DC/RF Cabling Diagram - DC and RF Configuration
- CV, RF, and DC Measurement System Configuration
- 1/f Noise, CV, RF, and DC Measurement System Configuration
- Instrument Control Interface
- The LAN/GPIB Gateway
- Performance Characteristics and Specifications
- Installing the System
- Verifying System Functionality
- Servicing the System
- Enhancing Measurement Accuracy
- DC Subsystem Functional Verification Test
- RF Subsystem Functional Verification Test
- CV Subsystem Functional Verification Test
- 1/f Noise Subsystem Functional Verification Test
- Understanding the Bias Networks
- Network Analyzer Performance Specification Summary
- Index