Atec Agilent-Infiniium-9000 Series - Manual (Page 8)

8
Widest range of debug and compliance software applications: serial protocol and FPGA
USB serial trigger and protocol viewer (N5464B or Option 005 on new scope purchases)
Trigger on and quickly view USB packets, payload, header and detail information. Powerful
time-correlated views of waveform and symbol, to the bit level, make it easy to isolate
communication faults to logic or analog sources.
USB hardware-based triggering means triggering reliably, even on the most infrequent events.
Low and full-speed USB protocol is supported on digital and scope channels of all models.
High-speed USB protocol is supported on scope channels of 1 GHz, 2.5 GHz and 4 GHz models.
For more information: www.agilent.com/find/9000_USB
MIPI D-Phy serial decode and trigger (N8802A or Option 019 on new scope purchases)
This application eliminates the need to manually decode bus trafic. Using data captured on the
scope, the application lets you easily view the information sent over MIPI serial buses.
The application also enables software-based protocol triggering.
This application works on all 4 GHz models and can use any combination of the scope
channels
For more information: www.agilent.com/find/N8802A
SATA triggering and decode (N8801A or option 038 on new scope purchases)
Trigger on and view both protocol layer information and physical layer signal characteristics
for SATA 1 (1.5 GB/s). Numerical decode values are automatically displayed and synchronized
below the capture signal or seen in protocol viewer.
This application enables software-based protocol triggering. This application works on 4 GHz
and can use any combination of scope channels
For more information: www.agilent.com/find/N8801A
Trigger on and decode USB packets.
Trigger on and decode MIPI packets
Trigger on and decode SATA serial
packets
PCI Express ® serial trigger and protocol viewer (N5463B or Option 006 on new scope
purchases)
This application provides protocol-level triggering and viewing of a PCIe
® lane. Quickly view pack-
ets, payload, header, and detail information. Powerful time-correlated views of waveform, symbol,
character, link and transaction layer packet data down to the bit level make it easy to isolate com-
munication faults to logic or analog sources.
Trigger on and view CRC, 8B/10B and disparity errors. Hardware-based triggering for PCIe means
triggering reliably, even on the most infrequent events.
This application is supported on scope channels of 4 GHz models.
For more information: www.agilent.com/find/9000_PCI
Trigger on and decode PCIe serial packets.