Atec Agilent-8990B - Manual (Page 9)

9
Product Characteristics
The following specifications are applicable only when the N1923A/N1924A
wideband power sensors are used with the 8990B peak power analyzer. Using
the 8990B with other supported sensors might yield different results.
Power requirements • 100 V to 120 V (at 50 Hz - 60 Hz, 400 Hz)
• 100 V to 240 V (at 50 Hz - 60 Hz)
• Maximum power dissipated at 375 W
Operating environment • Operating temperature from 5° C to 40° C
• Relative humidity up to 95% at 40 °C (non-condensing)
• Operating altitude up to 4000 m (12000 ft.)
• Operating random vibration at 5 Hz to 500 Hz, 10 min/axis, 0.21 g (rms)
Non-operating conditions • Non-operating temperature from –40° C to +70° C
• Relative humidity up to 90% at 65° C
• Non-operating altitude up to 4600 m (15000 ft.)
• Non-operating random vibration at 5 Hz to 500 Hz, 10 minutes/axis, 2.09 g (rms);
Resonant search at 5 Hz to 500 Hz, swept sine, 1 octave/minute, sweep rate at 0.5 g
(0 peak), 5 minutes resonant, dwell at 4 resonance/axis
Dimensions (W x D x H) 430 mm (16.9 in) x 347 mm (13.7 in) x 330 mm (13.0 in)
Weight • <16 kg (net)
• <23.5 kg (shipping)
Sound pressure level • 45 dB
Electromagnetic
compatibility Complies with the essential requirements of the European (EC) Directives as follows:
• IEC 61326-2-1:2005/EN 61326-2-1:2006
• CISPR 11:2003/EN 55011:2007 (Group 1, Class A)
The product also meets the following EMC standards:
• Canada: ICES-1:2004
• Australia/New Zealand: AS/NZS CISPR 11:2004
Safety Conforms to the following product specifications:
• EN61010-1: 2001/IEC 61010-1:2001
• CAN/CSA C22.2 No. 61010-1-04
• ANSI/UL std No. 61010-1-2004