Atec Agilent-8133A - Manual (Page 6)

6
TRIGGER Output
Conditions: fout > 33MHz
Trigger Channel Output
The output voltage can be set in
amplitude/offset or high- and low
level mode (50
W to 0 V).
Amplitude : (0.20 V typical) 0.50 V to
1.80 V nominal
Level Window: -4.00 V to +4.00 V
Resolution: 10 mV
Format: fixed Duty Cycle 50% nominal
Prop. delay External Input to Trigger
Channel Output:
6 ns nominal for
trigger output divide by 1 Maximum
external voltage: ± 4 V
Transition Times
20% - 80% of amplitude:
< 100 ps
(< 60 ps typical)
Disable
A relay connects/disconnects the
trigger output
Divide
The trigger output frequency can be
divided.
Divide by: (1), 2, 4, 8, 16, 32, 64
Minimum output frequency: 33 MHz (3
MHz typical)
Bit 0 (PULSE/DATA CHANNEL 2 only)
The trigger output is synchronized to
Bit 0 of the 32 bit word in data mode.
It's a square wave signal divided by
32 with respect to the timebase
frequency.
Rearpanel Connectors
Agilent8133A: CHANNEL 1 ~ Output,
CHANNEL 1 - Input
Option 002: CHANNEL 2 - Output,
CHANNEL 2 - Input, Start/Stop -
Input
Option 003: CHANNEL 2 - Output,
CHANNEL 2 ~ Input
CHANNEL X Output amplitude: 2
Vpp, ac-coupled
CHANNEL X Input amplitude: max.
2.5 Vpp, ac-coupled, min. 1.0 Vpp,
ac-coupled
50% duty cycle
For proper operation the CHANNEL
X Outputs and Inputs have to be con-
nected through the supplied rigid
coaxial links.
Start/Stop Input
Interface: dc-coupled
Impedance: 50n nominal
Transitions: < 1 ns
Start level: 0 V (default)
Stop level: - 0.4 V
The Start/Stop Input is used for the
PULSE/DATA CHANNEL 2 to hold
the data stream to setup a data
pattern and to start data generation
on a specific bit.
Additional Features
Non-volatile Memory
Current settings are saved on power-
down. Additionally 20 complete
settings can be stored.
GP-IB Capabilities
All modes and parameters are
programmable. Operates according
to IEEE standard 488.1 and 488.2,
1987. Conforms to the Standard
Commands for Programmable
Instruments (SCPI) 1992.0.
General Information
Environmental
Storage temperature:
-40°C to +70°C
Operating temperature: O°C to 55°C
Humidity (0' C to 40' C): 95% R.H.
Power
110-120/220-240Vrms, ± 10%,
25OVA max., 47-63Hz
Weight
Net: 21.5 kg (48 lb)
Shipping: 29.0 kg (65 lb)
Dimensions
(HxWxD) 145 mm x 426 mm x 525
mm
(5.7 in x 16.75 in x 20.65 in)