Atec Agilent-8566B User Manual
Page 5
EMC Measurement
Solutions
Commercial and MIL EM1
Receivers
The HP 8566B spectrum analyzer
forms the heart of two powerful and
flexible EM1 receivers. These receivers
are ideal for commercial and military
EM1 compliance testing from 20 Hz
to 40
The HP 8571A receiver is optimized
for military EM1 testing, making both
peak and average detection measure-
ments using impulse bandwidths. The
HP 85728 includes all the features
and capabilities of the HP 85718, but
adds quasi-peak detection and special-
ized IF bandwidths for commercial
compliance measurements.
Both receivers offer
absolute
amplitude accuracy over their full
20 Hz to 22
frequency range, as
required by MIL-STD 461 and CISPR
Publication 16. For higher frequency
measurements, a 22 to 40
block
downconverter can be added. The
receivers include a built-in, 1 to
26.5
amplifier and a 20 Hz to
50 MHz input port with a built-in
limiter and rugged attenuator.
They are also compatible with HP’s
EM1 measurement software and
complete line of test accessories.
Test Systems Tailored to
Your Needs
For EM1 troubleshooting and
pre-qualification testing, use
your HP 8566B spectrum
analyzer with components and
accessories from HP’s complete
line of EM1 products. The many
offerings include current probes,
line impedance stabilization
networks
antennas,
positioning equipment, EM1
measurement software, an
RF preselector, and a
quasi-peak adapter.