Atec Kaelus-IQA Series - Manual (Page 2)

Mains power 115-230V, 50/60Hz AC
Power consumption 650W
DESCRIPTION TX RANGE RX RANGE (PIM) RTF MODULE #
iQA-0700LC 700MHz (low) 728-746MHz 698-716MHz RTF-1000A
iQA-0700HC 700MHz (high) 728-757MHz 776-787MHz RTF-1000A
iQA-0790C LTE800 791-821MHz 832-862MHz RTF-1000A
iQA-0850C 850MHz 869-894MHz 824-849MHz RTF-1000A
iQA-0900C GSM900 935-960MHz 890-915MHz RTF-1000A
iQA-0901C EGSM900 925-960MHz 880-915MHz RTF-1000A
iQA-1800C DCS1800 1805-1880MHz 1710-1785MHz RTF-2000A
iQA-1921C Dual band PCS/AWS 1930-1990MHz/2110-2155MHz 1710-1755MHz/1850-1910MHz RTF-2000A
iQA-2101C UMTS (3rd & 7th order) 2110-2170MHz 1920-2080MHz RTF-2000A
© 2012 Kaelus. All Rights Reserved. iQA_C_RevA_4.12
www.kaelus.com
|2|
TECHNICAL SPECIFICATIONS CONTINUED |
ELECTRICAL
Dimensions 19 x 18 x 12in (500 x 457 x 305mm)
Weight < 50lbs (22.7kg)
Cooling Forced air
MECHANICAL
Operating temperature range -10°C to +40°C
Storage temperature range -20°C to +60°C
Ingress protection (IP) IP20 (with lid open) IP21 (with lid closed)
Relative humidity 5% to 95% RH non-condensing
Mechanical shock 40G shock rating
ENVIRONMENTAL
MODELS |
iQA with optional RTF module Self contained, ruggedized transport case.
*Range to Fault is an optional accessory available for iQA test instruments
which enables users to measure distance to return loss faults as well as
distance to PIM faults. The RTF module is sold separately.
WARNING: Use of the portable PIM analyzer in a radiating mode, for
example when connected to an antenna not enclosed in an anechoic
environment, may be a violation of licensing regulations. Users should
have permission in advance, from any licensed operators that might be
affected by these tests. Furthermore, radiating high RF power can pose
a personnel risk.
Specifications subject to change without notice.