Avision AV100CS - Manual (Page 13)

2-6
2.2 Installation of the SCSI Card
Hardware Installation
Power off your computer.
Plug the SCSI card in an available slot of your computer.
Be sure to screw it firmly.
Power on your computer.
Software Installation
In Windows 3.1
If your SCSI card is bundled with Avision AV100CS,
then installing the scanner driver will at the same time
complete the installation of the SCSI card driver.
If your SCSI card is not bundled with Avision
AV100CS, then please follow the installation sheet
contained in your SCSI card.
In Windows 95
Press Start Setting Control Panel. And then double click
"Add New Hardware". Select SCSI Adapter.
Choose Have disk and type "d:\DTCSCSI"(d representing the
letter for your current CD-ROM drive)
Choose Finish and restart Windows 95.
In Windows NT
Press Start Setting Control Panel. And then double click
"Add New Hardware". Select SCSI Adapter.
Choose Driver tag and Add new SCSI Adapter.
Choose Have disk and type "d:\DTCSCSI(d representing the letter
for your current CD-ROM drive)
Choose Finish and restart Windows NT.
•
If your SCSI card is bundled with Avision AV100CS,
you can refer to the Appendix for more details in
regards to the installation of the SCSI driver.