Avision AV100CS - Manual (Page 8)

2-1
2. Scanner Installation
Precautions
* Keep the scanner out of direct sunlight. Direct exposure to
the sun or excessive heat may cause damage to the unit.
* Do not install the scanner in a humid or dusty place.
* Be sure to use the proper AC power source.
* Place the scanner securely on an even, flat surface. Tilted
or uneven surfaces may cause mechanical or paper-feeding
problems.
* Retain the scanner box and packing materials for shipping
purposes.
2.1 Installation Procedure
Please unpack the packing carefully, and check the contents
against the checklist. If any items are missing or damaged,
please contact your dealer immediately.
Installation of the slide guides, the paper guide and the
paper stand. (See Fig. 2-1)
1. Open the scanner front door by pulling it away from the
unit gently.
2. Insert the paper guide into the center notch located on
top of the unit.
3. Insert the two slide guides to the left and right of the
paper guide. When properly installed, the guides should
move freely from side to side.
4. Insert the two ends of the paper stand into the small
holes on both sides of the paper guide.
5. Close the scanner front door.