Maintenance – Avision AV3200SU (300500001/300500002) User Manual
Page 74
User’s Manual
6-1
6. Maintenance
6.1 Cleaning the ADF
The scanner is designed to be maintenance free. However,
it still needs to be cleaned occasionally to ensure optimum
image quality and performance.
From time to time the pad assembly and feeding rollers
may become contaminated with ink, toner particles or
paper dust. In this case the scanner may not feed
documents smoothly or several documents may feed at
once. If this occurs please follow the cleaning procedures
to return your scanner to its original state.
The cleaning procedures
i).
Moisten a cotton swab with isoprophyl alcohol (95%).
(Cleaner kits are available from PictureVision.)
ii). Carefully open the ADF to the left . Wipe the feeding
rollers by moving the swab from side to side. Rotate
the rollers forward with your finger and repeat the
above cleaning procedures until the rollers are clean.
Be careful not to snag or damage the pick springs.
iii). Wipe the pad in the direction from top to bottom. Be
careful not to hook the pick springs.
iv). Close the ADF unit. Your scanner is now ready for
use.