Avision AV360C - Manual (Page 20)

4-6
Color Match:Adjusts the color quality of the image so that it
comes close to that of the original. This function
uses default parameters to adjust the image.
Reset: Resets the scanning parameters you set.
Invert: The invert command reverses the brightness and
the color in the image. For color images, each
pixel will be changed into its complementary color
at the command of Invert.
Calibration: Defines “whiteness” for the scanner. Users are
recommended to calibrate the light source if the
scanned image looks undesirable or comes out to
be too dark.
Quality/Speed Mode:
Users can select either mode to perform scanning
according to their own need. Select quality mode
scanning if your emphasis is on the quality of the
scanned image. Else, select speed mode scanning
if you want to speed up the scanning process.
Pixel/Inch/Cm:
Represents the different measure systems to be
used in each scan.
Set Gamma: Adjusts the midtone of the image without losing
details of the lightest and the darkest areas.
Image Information:
Gives related information of the scanned image.