Avision AV360C - Manual (Page 27)

6-4
Else, without power, the scanner can not
transfer the printing data/signals to the printer.
Question: Why doesn’t my GDI printer work with the
Avision AV360C scanner?
Answer: Disable the “Auto Scan” function in the
application, and your printer will function all
right.
Question: Why some parallel port devices and software’s
keypro do not work with the Avision AV360C
scanner?
Answer: The Avision AV360C scanner can do pass-
through printing all right, but not otherwise. As
such, if you would like to connect some parallel
port devices other than printer, please do not
connect them to the same parallel port that
Avision AV360C currently uses. It is advisable
that you use other parallel ports to connect these
devices or keypro. For instance, you can
connect the Avision AV360C scanner to LPT1,
and connect other parallel port devices to LPT2.
Or you can add a data switch to avoid the
problem.