Avision IS1000 (BF-1008S) - Manual (Page 14)

2-4
2.4 Connecting to Computer
1. Connect the square end of the USB cable to the USB port of
your scanner. Connect the rectangle end to the USB port of
your computer.
2. The computer should detect a new USB device and prompt
a “New Hardware Found” message.
3. In Windows 2000, confirm that the “Search for a better
driver.” is selected and click the “Next” button.
In Windows XP, click the Next button to continue. When
the XP certification screen appears, click Continue
Anyway to complete the installation.
4. When the Finish dialog is prompted, click the Finish
button.
Note:
If the scanner is connected to both your computer and flash
disk, you can interchange the output modes (scanning to
computer or scanning to flash disk) by pressing the Function
Selector or File format/Image Merge button.