Avision IS1000 (BF-1008S) - Manual (Page 99)

6-3
3. The Button Panel shows the first five scanning buttons.
Right-click the button (function) you wish to check. The
Button Properties window appears.
The default setting is indicated in highlighted color. If you
wish to change the setting, use this window to reset the
setting for the file format, destination application, or other
scan settings. See “Configuring the Button” in the
subsequent section to reset the settings.
4. Click the OK button to leave the window.
Click to select
options or
setting.
The button
number and
name.
The file
format of the
scanned
image. (*The
options vary
based on
type of
scanner.)
The scan
settings for
the selected
button.
The destination
application.
(This is the
application that
opens after you
have finished
scanning.)