Avlex ACT-80T Wideband Digital Bodypack Transmitter - Manual (Page 4)

Audio Input Connector: TA4F mini 4-pin
connector accepts any MIPRO lavalier,
instrument and headset microphones and
cables. (See 5 ways of connection on AF Input
Connections)
1
Bodypack Controls and Indicators
Digital Bodypack Transmitter Digital Bodypack Transmitter
4 3
MUTE Button: To mute and un-mute the audio
signal temporary.
Antenna: Flexible 1/ 4 wave transmitting
antenna.
Transmitter Housing: Holds PCB board and
wires.
LCD Panel: Display transmitter parameters.
SET Button: Parameter selection button.
MODE Button:
Power Button: Press and hold 2 seconds to
power ON or OFF.
ACT IR Port: Align and syncs the transmitter
and receiver frequency automatically.
Battery Compartment: Holds 2 'AA' batteries.
Battery Cover: Hinged cover opens to provide
access to 2 'AA' batteries.
External Mute Connector: When an external
mute switch cable, MJ-70 (optional) is
connected, user can manually mute and un-
mute the audio temporary.
Belt Clip: Detachable and reversible design
allows the transmitter to be worn on a belt,
waistband, or guitar strap ( .
Allows access to 9 available
functions displaying in LCD panel.
Figure 1)
4
5
6
7
8
9
10
11
12
13
3
2
3
4
5
12
13
9
SET MODE ON
8
6
7
2
1
11
10
485.000
MHz
FREQUENCY