AVTECH Digital Temperature Sensor (TMP-SDT-SEN) - Manual (Page 2)

Digital Temperature Sensor (RMA-SDT-SEN)
AVTECH Software, Inc. Page 2 of 3 AVTECH.com
Configure Your Digital Temperature Sensor
With Room Alert’s Built-In Web Interface
Navigate to Settings Æ Sensors in the web interface of your Room Alert or TemPageR.
The options you see below will vary depending on the model.
1. Scroll down to your external digital sensor(s), the total number of which will vary
depending on the Room Alert or TemPageR model.
2. Find the digital sensor interface that matches the port you connected your Digital
Temperature Sensor to. Notice that your Room Alert or TemPageR monitor
automatically detects the type of digital sensor and displays it in “Sensor Type.”
3. In “Sensor Label,” you may leave the default “Ext Sensor 1” or enter a descriptive name
of up to 15 alphanumeric characters, such as “Ext Temp Rack 7” or “Server Rm Temp.”
4. “Alarm On” automatically populates with the default temperature scale. Please refer to
your Room Alert or TemPageR User’s Guide & Reference Manual to change it.
5. In “High” and “Low,” you may leave the default, 0, or enter values for high and low
thresholds. Your monitor generates alerts based on those thresholds.
6. In “Adjust,” you may enter a value to increase or decrease the temperature value if the
reading your sensor provides differs slightly from a known value or source.
7. For models with the “Use Alarm Profile” feature: if you have configured Alarm Profiles
in the Alarm Options screen, you may choose a profile from the drop-down menu.
Otherwise, you may leave the default, “No Alarm.”