B&K Precision 4079 - Manual - Manual (Page 10)

4
waveform, 50 Ω source impedance
Reference IN-OUT
10 MHz, TTL compatible, input or output, for external
unit synchronization 50 Ω output impedance and 1 kΩ
input
Summing IN
Adds signal from an external source to the main
output. Input impedance is 500 Ω
Internal Trigger
Repetition 1 ms to 100 s
Resolution 4 digits
Accuracy +0.002%
General
Display Resolution 160 x 80 dots LCD
Remote Control Interface GPIB, RS-232
Store Memory 50 full panel settings at power-off
Dimensions 8.4(213) x 3.5(88) x 11.8(300) inches (mm) (WxHxD)
Weight Approx. 2.5 kg (5.5lbs)
Power 100-240 VAC ± 10%, < 50 VA max.
Temperature
Operating 0 ºC to +50 ºC
Non-
operating
-20 ºC to +70 ºC
Humidity 95 % RH , 0 ºC to 30 ºC
EMC
According to EN55011 for radiated and conducted
emissions
Electrical Discharge Immunity According to EN55082
Safety Specifications According to EN61010 , CE approved
NOTE
Specifications listed in manual are applicable after a powered 30 minute warm-up
Specifications are verified according to the performance check procedures.
Specifications not verified in the manual are either explanatory notes or general performance characteristics only.
Specifications and information is subject to change without notice. For the most current and correct data please visit
www.bkprecision.com
Modulation Combinations
SINE SQUARE TRIANGLE PULSE ARBITRARY
AM Yes Yes Yes Yes Yes
FM Yes Yes Yes No No
FSK Yes Yes Yes No No