AmeriHome QTPOP Table Top Popcorn Maker - Manual (Page 4)

QTPOP Electric Tabletop Popcorn Popper
4
ASSEMBLY
Before and after use, wash all parts with warm soapy water. Use care when handling the product
and when cleaning the product to prevent injury.
Install the kettle into to the Popcorn Popper by hanging the
pegs located on either side of the kettle onto the hooks hanging
from the inside the top of the Popcorn Popper (Fig 1).
Plug the internal power cord, which is attached to the kettle,
into the outlet inside the top of the Popcorn Popper (Fig 2).
DO NOT PLUG THIS CORD DIRECTLY INTO THE WALL.
Only the external power cord should be plugged into an
electrical outlet.
Before and after use, clean the kettle with warm soapy water.
Wipe down the inside of the Popcorn Popper with a cloth wet with hot
and soapy water. DO NO SUMBERGE THE KETTLE PLUG OR
THE POPCORN POPPER IN WATER. Dry the Popcorn Popper
before beginning.
Fig. 2
Fig. 1