Connector & switch definition, Hdd failure signal connector – Chenbro SK32303 Installation Guide with 3Gb/s SATA/SAS Backplane - Manual User Manual
Page 12
12
SK32303 ver. A1
User’s Manual
www
.chenbr
o.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]
Connector & Switch Definition
HDD Failure Signal Connector
This connector is for the SATA RAID card with HDD failure signal support such as ARECA ARC-1230 & 1260.
Connect the failure signal connectors on SK32303 backplane and RAID card to activate the HDD failure LED.
Setting for HDD Failure Signal Cable Connection (SK32303 Backplane)
Setting for HDD Failure Signal Cable Connection (RAID Card)
Connect the 4-pin HDD LED cable to the CATHODE of the HDD failure connector on RAID card. Refer to your
RAID card’s user manual for the detailed pin definition.
HDD 1
HDD 2
HDD 3
HDD 1
HDD 2
HDD 3
HDD LED Cable: 26H113215-005