Introduction, Functional specification, General – Chenbro SK32303 Installation Guide with 3Gb/s SATA/SAS Backplane - Manual User Manual
Page 7: Host / drive / power backplane interface, Monitoring function
7
SK32303 ver. A1
User’s Manual
www
.chenbr
o.com
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]
Introduction
The CHENBRO SK32303 can house three 3.5” HDDs in a two 5.25” bays converter (Depth of 9.5”
recommended). The ability for conversion allows existing servers to perform the maximum HDD density
while keeping the flexibility. In all, SK32303 is the best solution as value added feature and performance.
Functional Specification
General
z Support up to SATA-II and SAS (3.0 Gb/s)
z Compatible with 3.5” SAS, SATA-I and SATA-II HDD
z Support inrush current control for HDD Hot-swapping
z LED indicate activity and failure for each HDD
z Alternative HDD activity and failure signal source
Host / Drive / Power Backplane Interface
z Direct link SATA / SAS ports
z 3 x SATA Signal + Power (7+15 pin) connectors at HDD side of backplane
z 3 x SATA interfaces (7 pin)
z 2 x DC power connectors (4-pin D-type)
Monitoring Function
z 1 x Fan connector with speed monitoring
z 2 x temperature sensors for HDD overheating monitoring
z Alterable overheat temperature: 55
℃ or 65 ℃
z Support 1 x buzzer for audible alarm, 3 x LED for overheat, fan & HDD failure indicator, 1 x alarm mute
button for disabling audible alarm