Lexibook DJ053 Series - Manual (Page 22)

ENGLISH
22
INSERTING NEW BATTERIES
Please refer to image E.
1. Make sure the camera is off.
2. Using a screwdriver, open the battery
door located under the unit.
3. Insert 3 x LR03/AAA 1,5V type batteries
(not included) observing the polarity
indicated inside the battery compartment
and as per the diagram shown opposite.
4. Close the battery compartment and
tighten the screw.
WARNING: Malfunction or loss of memory may be caused by strong frequency
interference or electrostatic discharge. Should any abnormal function occur, remove
the batteries and insert them again.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are
to be removed from the product before being charged. Rechargeable batteries
are only to be charged under adult supervision. Different types of batteries
or new and used batteries are not to be mixed. Only batteries of the same or
equivalent type as recommended are to be used. Batteries are to be inserted
with the correct polarity. Exhausted batteries are to be removed from the product.
The supply terminals are not to be short circuited. Do not throw batteries into
a fire. Remove the batteries if you are not going to use the product for a long
period of time.