Lexibook DJ053 Series - Manual (Page 25)

ENGLISH
25
Photo frame button
Use this function to add 4 different frames to your photos. In camera mode, press
the “Photo frame” button repeatedly to change the frame
Flash function
To use the flash, repeatedly press the FLASH button until your desired setting is
shown by the icon on the screen:
Note: the flash will not work when the battery is low.
Self-timer and continuous shots
1. Press the Menu button.
2. Press the UP or DOWN buttons to select ‘Capture Mode’ and press the OK
button to confirm.
3. Press the UP or DOWN buttons to select ‘Off’, ‘Self-timer 2S’, ‘Self-timer 10S’ or
‘Continues’ (takes three photos in quick succession) and press the OK button to
confirm.
4. Press the Menu button to return to camera mode and then press the SHUTTER
button to start the countdown and take the photo.
5. To turn off the self-timer feature, repeat the steps above and select ‘Off’ at
step 3. If you turn your camera off it will automatically reset to the self-timer off
setting.
6. To turn on the ‘Continues’ function and take 3 photos with one press of the
shutter button, repeat steps 1-4 but select ‘Continues’ at step 3.
7. To exit at any time, press the Menu button.
Flash is on
Auto flash is on
Flash is off
A