Broadband settings – Actiontec V1000H User Manual User Manual
Page 46
43
Chapter 5 Advanced Setup
Broadband Settings
The Broadband Settings screen allows the Modem Router to connect to differ-
ent service providers, which may have different connection parameters than the
Modem Router’s default settings. To change Broadband Settings:
Click
1.
Broadband Settings from the menu on the left side of any Advanced
Setup screen. The Broadband Settings screen appears.
Select the type of WAN interface the service providers uses. Options are WAN
2.
Ethernet, WAN DSL PTM, and WAN DSL ATM.
Enable or disable Global VLAN on the Modem Router by clicking in the
3.
appropriate radio button. Global VLANs are used on the WAN and LAN
sides to create virtual networks. Do not enable or disable Global VLAN unless
instructed to do so by your ISP.
Click
4.
Apply to save your changes.