ASB Heating Elements Ltd. Radiant Heaters - Manual (Page 4)

Radiant Heaters
2 3
/8
X
Figure 229
Black Body Ceramic Infrared Heaters
• Nickel Chromium Resistance Wire
• Efficiently emits radiant energy
• Corrosion and oxidation resistant
• Peak energy wave length of 3-5 microns
• Virtually no maintenance required
• Available with type J or type K thermocouple
• 6 inch ceramic bead insulated leads
• Wattage tolerance +/- 5%
Catalog Number A-1-1000 A-1-650 A-1-400 A-2-500 A-2-325
wattage 1000 650 400 500 325
Average Surface 750°C 630° 510°C 750°C 630°C
Temperature 1380°F 1165°F 950°F 1380°F 1165°F
Maximum Allowable 800°C 700°C 565°C 800°C 700°C
Surface Temperature 1470°F 1290°F 1050°F 1470°F 1290°F
Peak Wave Length
2.9 3.2 3.7 2.9 3.2
(µm)
Catalog Number Wattage Voltage X
A-1-1000 1000 220/230 9 5/8
A-1-1000-4 1000 480 9 5/8
A-1-650 650 220/230 9 5/8
A-1-650-1 650 120 9 5/8
A-1-650-4 650 480 9 5/8
A-1-400 400 220/230 9 5/8
A-2-500 500 220/230 4 3/4
A-2-325 325 220/230 4 3/4
AL-3-200-1* 200 120 2 3/8
*Flat profile
Housings for “A” series elements
To be used with A-1 Series Black Body Ceramic Heaters.
Custom lengths and configurations are available. Consult
factory. Housings include mounting bolts, reflectors,
ceramic terminal blocks and pre-wired insulating bus.
Catalog Number A(Length)
A-1-H 10”
A-2-H 19 5/8
A-3-H 29 3/4
A-4-H 39 1/2
A-5-H 49 1/4
A
3 15
/16
“
2 1
/2
“
3“
A-1-H
A-2-H
A-3-H
A-4-H
A-5-H
G4
Figure 230
Figure 231
Figure 232
Figure 233
Figure 234