Moulinex MASTERCHEF GOURMET QA402G - Manual (Page 14)

approved service centre.
• Always remove the blender (d) or the juice extractor (h) before pressing the multi-function head (a3)
release button (a2).
• Always use the pusher (f7) with the mincer head accessory (f), to guide food in the feed tube. Never
use your fingers, a fork, a spoon, a knife or any other object.
• Never touch any moving parts. Wait for the appliance to come to a complete stop before removing
accessories.
• Handle the sharp blades (d, f, g) carefully when emptying the bowls and when cleaning: they are
extremely sharp.
• Do not touch the whisks or the kneader when the appliance is running.
• Do not allow long hair, scarves, ties etc. to dangle over the appliance during operation.
• Never insert utensils (spoon, spatula, etc.) through the feed tube in the lids (b2), (d2) or (h2) in the
drum body (g1).
• Do not run the blender jug (d1) without its lid (d2).
• Use only one accessory at a time.
• Do not use the bowls (b1, d1) as containers for freezing, cooking or sterilisation.
• Do not use the juice extractor if the rotary filter (h3) is damaged.
• Before using for the first time, wash all accessory parts in soapy water (except for the attachment (e):
see § Cleaning) Rinse and dry.
• Place the appliance on a flat, clean and dry surface. Make sure that the selector button (a1) is in "0"
position and plug in your appliance.
• You have several options for starting your appliance:
- Intermittent operation (pulse): Turn the selector button (a1) to the "pulse" position. Using a
succession of pulses can give you better control when preparing certain foods.
- Continuous operation: Turn the selector button (a1) to the desired position from "1" to "max"
depending on the food you are preparing.
You can change it as required during preparation.
• To stop the appliance, turn the button (a1) to "0".
Important : The appliance will start only if the cover (a5) and the head (a3) are locked. The
appliance will stop immediately if you unlock the cover (a5) and/or the head (a3) during
operation. Lock the cover and/or the head, turn the control button (a1) to the "0" position, and
then start the appliance normally by selecting the desired speed.
Your appliance comes with a microprocessor that controls and analyses the operating power. If the load
becomes too high, your appliance will stop automatically. To restart your appliance, turn the rotary
button (a1) to the "0" position and remove some of your ingredients. Allow your appliance to cool down
for a few minutes. You can then select the desired speed to complete your preparation.
1 - MIXING / KNEADING / BEATING / EMULSIFYING / WHISKING
You can prepare up to 1.2 kg of dough using the stainless steel bowl (b1) and its lid (b2) depending on
the food.
ACCESSORIES USED:
- Stainless steel bowl (b1).
- Lid (b2)
- Kneader (c1) or mixer (c2) or balloon whisk (c3)
1.1 - ASSEMBLING THE ACCESSORIES
• Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place.
• Lock the stainless steel bowl (b1) (clockwise) on the appliance and put in the ingredients.
BEFORE FIRST USE
The paragraph numbering corresponds to the numbers in the diagrams.
18
EN
MO_KITCHEN-MACHINE-MC-GOURMET_0828538_EO_FR-EN-NL-DE-IT-SV-NO-DA-FI 15/12/10 09:08 Page18