Alpine 68-00493Z15-B - Manual (Page 10)

8
-EN
Other Useful Features
Changing to Another Product’s Source
When used with touch panel compatible products
such as IVA-D300/VPE-S431, sources
connected to those products are also selectable.
1
Touch the option part of the display to display
each source operation screen or source
selection screen.
2
If each source operation screen is displayed,
touch CONTROL on the upper right side of the
screen to display the source selection screen.
3
Touch SOURCE.
• Receives the remote control signal from connected
ALPINE products such as navigation and DVD players.
Remote Control Sensor
Remote sensor
<When the AUX IN 1 connection destination is IVA-
D300 etc.>
Each time you touch “SOURCE”, the source
changes.
The source depends on the settings and
connections of the product used together with
the IVA-D300.
Refer to the combined products instructions
manuals.
<When the AUX IN 1 connection destination is VPE-
S431>
After touching “SOURCE”, change the source
with the following operation.
1) Touch “P 1/2”.
The screen changes to “P 2/2”.
2) Touch “ ” “ ” “ ” “ ” to select the
desired source. Touch “ENTER”.
Touch “RETURN” to return to the previous
screen.
• When “SETUP” is selected, the setup operation on
the VPE-S431 can be performed in the same way as
the source selection operation. For details on the
setup items, see the VPE-S431’s operating
instructions.
CONTROL SOURCE
NAV. AUX 1 AUX 2 SETUP VISUAL
EQ
SOURCE P 1/2