Castle TSM-11 User Manual
Page 15
Advertising
CASTLE, INC
TSM‐11 OWNERS MANUAL V1.4
Page 15 of 22
1612
113
4"
Included with you machine is a template for cutting out a cover for the bottom of your TSM-11,
necessary for creating a vacuum for pulling dust and air out of the case. Using the template
provided; cut out a cover for the hole in the bottom of the case from any 1/8” thick material.
At the underside opening of the case, slip the clips over the holes provided with the flat face of
the clips facing out. Use the screws included with the clips to secure the 1/8” thick base cover to
the base at the clips.
Fig 24
Fig 25
Advertising